FREE UK MAINLAND DELIVERY ON ORDERS OVER £50
Not Find Exactly What You Need?
Advance Search
Not Find Exactly What You Need?
Advance Search
Being able to accurately monitor the status of rotating components is critical in many applications. Modern AC motors require encoders to continuously monitor speed, position and direction of rotation. These encoders, which are typically external to the motor, are exposed to environmental conditions, which in some cases can have a significant impact on service life.
SKF motor encoders, however, are mechatronic units that combine sensor and bearing technology. Available for shaft diameters ranging from 15 to 45 mm, these encoder units are mounted directly inside the motor and require only 6 mm of extra space in the axial direction. The sensor body, impulse ring and bearing are mechanically attached to each other, forming a compact, integrated, ready-to-mount unit that is shielded from external influences. SKF motor encoder units, which can be installed on the drive or driven side of asynchronous motors, provide a medium resolution signal between 32 and 80 digital pulses per revolution. They can accurately detect speeds from zero to 20 000 r/min.
SKF also has a series of motor encoder units designed for harsh operating conditions. For more information, contact the SKF application engineering service.
All trademarks, logos and brand names used on this website are the property of their respective owners. All company, product and service names used in this website are for identification purposes only. Use of these names, trademarks and brands does not imply endorsement.
bearingswebshop.com is a trading name of 1T Solutions Limited bearingswebshop.com
© 2008 – 2025 1T Solutions Limited. All Rights Reserved.
Disclaimer:
Errors and Omissions Excepted.
Any dimensions, tolerances or performance figures shown on this website and any associated documents are for guidance only. For factual figures, reference should be made to the current edition of the appropriate standards where applicable.
Every effort is made to keep the information on this website accurate and up to date. However, bearingswebshop.com accepts no responsibility for errors or omissions or for any third party loss or consequences arising from what is published.
The information within this website is based on our present knowledge and experience, and is supplied in good faith.
No liability is accepted by bearingswebshop.com. in respect of any action taken by a third party.
The products detailed on this website may be used for a variety of purposes and as bearingswebshop.com has no control over their use. bearingswebshop.com excludes all conditions and warranties expressed or implied by statue or otherwise, as to dimensions, properties and/or their suitability for an application.
